Printer ON but paper pulling LED is blinking!!!

It is painful to maintenance a printer specially ink jet printer. It should print regularly otherwise its head can block by the condensed ink. If the printer head is damage it can replace by another one but price is high and a new printer can buy. Another hardware problem is printer on but paper pulling LED is blinking and paper doesn’t pull in to the printer. Why?    

1.     Printer’s sensor does not work. Some times paper jammed in the roller in that case if we try to pull the paper out of the printer the sensor can damage.

2.     Paper doesn’t keep properly to the paper tray. 

    

                                                            

Solution:

 

1.     If the printer’s sensor does not work, we should go to a hardware engineer who is specialist in printer. After changing the sensor it would work again.

2.     Keep paper appropriately to the paper tray.

3.     If printer has no other problem, it will pull the paper perfectly. And blinking will stop.

Finish the computer hardware tips.

Read More

Specific program (soft) does not open or hanged?

We install various programs in our computer for various purposes. Some are necessary and some are unnecessary. We should remove unnecessary program. Some times problem occurred, a specific program does not open or opened but hanged or opened but stopped itself. Why?

1.     May be the computer has insufficient memory or RAM.

2.     Installed program is defected.

                                            

                                                

Memory Error

Solution:

1.     Generally insufficient memory create problem to run the program. In this situation we should have to increase memory otherwise no way.

2.     We can install that program in a good computer. If the program doesn’t run it should guess that program is defected. Or its any file is corrupted.

3.     We can test by installing another version of the soft.    

Finish the tech tips

Read More

Power comes but no print on printer why?

A printer is used for print in paper of the processing result of computer (CPU). Printer is one of the output devices of computer. If we print any information in paper it is called hard copy. In a printer has memory where the processing result has saved. When we command for print it starts to print in paper. But some times it does malfunction. Why?

1.     Printer port (parallel port) may be damaged.

2.     Printer cable is not may be connected correctly to the printer port.

3.     Printer cable may be damaged.

4.     Printer it self defected.

     

5.     Printer driver is not installed perfectly or driver is mismatching.

                                                   

                                             

Printer in Trouble

Solution:

      

1.     At first check that printer cable is tightly connected to the printer and computer.

2.     We can check the printer cable/data cable by using another good cable.

3.     Use the printer to another computer if there does not print the printer is defected.

4.     If the upper process is fine then install the printer driver correctly or re install.

       

Finish the tech tips.

Read More